Air Operating Permit - Puget Sound Clean Air Agency

EMISSION UNIT SPECIFIC REQUIREMENTSI.B.3 Coating, Cleaning, and Depainting OperationsPermit No. 13120Expiration Date: September 12,2013Page 81 of291EU 3. 180 Order of The Boeing Operation and Maintenance Plan, as II.A.2( d)(ii)Approval No. required by Regulation I Section 7 .09(b), shall include Spray Booths8246 (6) provisions for inspecting the first stage of the filter and Other(10113100) system for proper seating and complete coverage over Particulatethe exhaust plenum at least monthly and inspecting Controlboth the first stage and second stage filters every timethe first stage filter is changed.Booths,II.B OperationandMaintenance(O&M) PlanRequirements.EU 3.181 Order of If improperly seated filters or incomplete coverage II.B OperationApproval No. over the exhaust plenum are observed, Boeing shall and8246 (7) take corrective action as specified in the facility's Maintenance(10113100) Operation and Maintenance Plan. (O&M) PlanRequirements.EU 3. 182 Order of Boeing Everett shall install and maintain a differential II.A.2( d)(ii)Approval No. pressure transmitter or gauge to measure the pressure Spray Booths8292 (3) drop across the new dry particulate control system. and Other(2122101) The pressure drop shall be displayed on a readout or Particulatethe gauge. Within 90 days after beginning operations, Controlthe acceptable pressure drop range shall be clearly Boothsmarked on or nearby the readout, gauge, and thepressure drop log.EU 3. 183 Order of Once each week that the spray booth is used, Boeing II.A.2( d)(ii)Approval No. Everett shall determine and record if the pressure drop Spray Booths8292 (4) across the exhaust filters is in the acceptable range. If and Other(2122101) the pressure drop is not within the acceptable range, ParticulateBoeing Everett shall take corrective action asControlspecified in the facility's Operation and Maintenance BoothsPlan.EU 3. 184 Order of High volume low pressure (HVLP) equipment, air I1.A.1 (d)Approval No. brush spray equipment, or aerosol cans shall be used Work Practice8292 (5) for spray coating operations. Inspection(2122101)Boeing-Everett Permit, issued September 12, 2008; Administrative Amendment 3: October J 0, 2012