Air Operating Permit - Puget Sound Clean Air Agency

II. MONITORING, MAINTENANCE, AND RECORD KEEPING Permit No. 13120Expiration Date: September 12, 2013Page 223 of291TABLE 1 OF SUBPART WWWW(EMISSIONFACTORS)EP for materials with < 33%organic HAP (19% organic HAPfor nonatomized gel coat)EP for materials with 33% ormore organic HAP (19% fornonatomized gel coat)o en molding Manual resin applicationNonyapor suppressed resin 0.126*% HAP*2000 (0.286*%I-IAP)-0.OS29)*2000Vapor-suppressed resinOpen molding: Non-atomized mechanical resin applicationNonyapor-suppressed resin 0.107*%HAP*2000 ((0.IS7*%HAP)-0.016S)*2000Vapor-suppressed resinD.I 07*%HAP*2000*( 1-(O.4S*VSE factor))(0.286*%HAP)-0.OS29)*2000*(I-(0.S*VSEfactor))0.126*%HAP*2000*(I-(O.S*VSE factor))((0.157*%HAP)-O.D 16S)*2DOO*(I-(0.4S*VSEfactor))Open molding: Nonyapor-suppressed gel coat applicationAtomized spray application D.446*%HAP*2000 ((1.03646*%HAP)-0.19S)*2000Nonatomized spray application 0.18S*%HAP*2000 ((0.4S06*%HAP)-0.OSOS)*2000Note: With reference to the table aboye, the VSE factor means the percent reduction in organic HAPemissions expressed as a decimal measured by the VSE test method of appendix A of 40 CPR 63 SubpartWWWW, and % HAP means total weight percent of organic HAP (styrene, methyl methacrylate, and anyother organic HAP) in the resin or gel coat prior to the addition of fillers, catalyst, and promoters. Inputthe percent HAP as a decimal.[40 CFR Part 63 Subpart WWWW, Table 1,8/26/05]Boeing~Everett Permit, issued September 12, 2008,' Administrative Amendment 3: October 10, 2012