Air Operating Permit - Puget Sound Clean Air Agency

EMISSION UNIT SPECIFIC REQUIREMENTSI.B.3 Coating, Cleaning, and Depainting OperationsPermit No. 13120Expiration Date: September 12, 2013Page 63 of291EU 3.120 PSD #91-06,Amendment2, Condition#2,6/13/05EU3.121 PSD#91-06,Amendment2, Condition#3,6/13/05EU 3. 122 PSD #91-06,Amendment2, Condition#4,6/13/05Only ail', nitrogen, inert gas, or carbon dioxide may beused to pressure test Model 777 wings.VOC emissions from Model 777 assembly operationsdescribed in Findings I through 4 of PSD #91-06 atBoeing Everett:I. Shall not exceed 238.8 tons per year.2. VOCs are as defined in 40 CFR 51.1 OO(s).Corrosion-inhibiting compound (CIC) coatings used atthe Final Body Join and Final Assembly tool positionsmust meet the following VOC emission factors. ForCIC coatings applied with hand held aerosol spraycans, the propellant shall not be included incalculating the coating VOC emission factor of thecoating. "Advanced" and "Heavy Duly" CIC shall beconsistent with the description in Finding lOb ofPSD#91-06.I. "Advanced" CIC: Maximum calculated VOCemission factor no greater than 0.023 kilogram VOCper meter squared of coated surface (kg VOC/m').2. "Heavy Duty" CIC: Maximum calculated VOCemission factor no greater than 0.016 kg VOC/m' ofcoated surface.3. CIC other than those listed above: Maximumcalculated VOC emission factor no greater than 0.012kg VOC/m 2 of coated surface.II.A.I(d)Work PracticeInspectionIl.A.2(p)EmissionEstimatesRequired byPSD or Orderof ApprovalPermitConditionII.A.2(b) VOCContentMonitoringandRecordkeepingProcedureIl.A.2(p)EmissionEstimatesRequired byPSD or Orderof ApprovalPermitConditionBoeing-Everett Permit, issued September J 2, 2008; Administrative Amendment 3: October 10, 2012