Air Operating Permit - Puget Sound Clean Air Agency

EMISSION UNIT SPECIFIC REQUIREMENTSLB.3 Coating, Cleaning, and Depainting OperationsPermit No. 13120Expiration Date: September 12, 2013Page 69 of 291EU 3.135 Order ofApproval No.3999(6/16/98),Condition #3Boeing shall install and maintain a gauge to measurethe pressure drop across the exhaust filters of thespray booth. The acceptable range for the gauge shallbe marked on or nearby the gauge.II.A.2(d)(ii)Spray Boothsand OtherPartieulateControlBoothsEU 3. 136Order ofApproval No.3999(6/16/98),Cond ition #4Boeing shall record if the pressure drop across theexhaust filters is in the acceptable pressure drop rangeonce each week that the spray booth is used.II.A.2(d)(ii)Spray Boothsand OtherParticulateControlBoothsEU 3.137 Order ofApproval No.3999(6/16/98),Condition #5If the pressure drop is not within the acceptable range,Boeing shall take corrective action as specified in thefacility's Operation and Maintenance Plan.II.B OperationandMaintenance(O&M) PlanRequirements.EU 3. 138Order ofApproval No.6690(3/7/97),Condition #4Spray gun cleaning procedures followed at thiscleaning station are subject to the requirements of 40CFR 63.744(c)(2); therefore, no atomizing air is to beused in the gun cleaning procedure.II.A.I(d)Work PracticeInspectionEU 3. 139Order ofApproval No.6691(3/4/97),Condition #4Spray gun cleaning procedures followed at thiscleaning station are subject to the requirements of 40CFR 63.744(c)(2); theretore, no atomizing ail' is to beused in the gun cleaning procedure.II.A.I(d)Work PracticeInspectionBoeing-Everett Permit, issued September 12, 2008; Administrative Amendment 3: October J 0, 2012