Air Operating Permit - Puget Sound Clean Air Agency

EMISSION UNIT SPECIFIC REQUIREMENTSLB.3 Coating, Cleaning, and Depainting OperationsPermit No. 13120Expiration Date: September 12,2013Page 84 of 291EU 3. 193Order ofApproval No.8603 (7)(2/8/02)Boeing shall comply with the requirements ofPugetSound Clean Air Agency Regulation II Section 3.09.NMREU 3. 194Order ofApproval No.8761 (3)(6/26/03)Boeing Everett shall install a dry filter with a removalefficiency greater than or equal to those discussed in40 CFR 63.745(g)(2)(ii)(A).I1.A.2(d)(ii)Spray Boothsand OtherParticulateControlBoothsEU 3.195 Order ofApproval No.8761 (4)(6/26/03)EU3.196 Order ofApproval No.8761 (5)(6/26/03)Activities in this booth shall be limited toManufacturing Research and Development (MR&D)activities.Boeing Everett shall install and maintain a gauge tomeasure the pressure drop across the spray areaexhaust filters.Il.A.I(d)Work PracticeInspection1I.A.2(d)(ii)Spray Boothsand OtherParticulateControlBoothsEU 3. 197Order ofApproval No.8761 (6)(6/26/03)Within 90 days after issuance of this Order ofApproval, the acceptable range for the gauge shall beclearly marked on or nearby the gauge or on apressure drop log.II.A.2( d)(ii)Spray Boothsand OtherParticulateControlBoothsEU3.198 Order ofApproval No.8761 (7)(6/26/03)Boeing Everett shall read and record the pressure d,'opat least once per calendar month. If the pressure dropis not within the acceptable range, Boeing shall, within24 hours of the initial observation, correct the pressuredrop or shut down the booth until the pressure drophas been corrected.1I.A.2( d)(ii)Spray Boothsand OtherParticulateControlBoothsBoeing-Everett Permit, issued September 12, 2008; Administrative Amendment 3: October 10, 20 J 2