Air Operating Permit - Puget Sound Clean Air Agency

EMISSION UNIT SPECIFIC REQUIREMENTSLBJ Coating, Cleaning, and Depainting OperationsPermit No. 13120Expiration Date: September 12, 2013Page 68 of291EU 3. 130 PSD #91-06,Amendment2, Condition#12, 6/13/05EU 3.131 PSD #91-06,Amendment2, Condition#17.2,6/13/05EU3.132 PSD #91-06,Amendment2, Condition#22,6/13/05EU 3. 133 PSD #91-06,Amendment2, Condition#23,6/13/05The emission exhaust systems serving the clean, sealand paint processes at the Wing Panel, Wing Spar,Wing Body Join, and mid-section seal and paint toolpositions shall be equipped with a filtering system toachieve 98.9 or greater percent chromium VI removal.Conduct inspections of the chromium VI filteringsystem at least once per calendar quarter.Nothing in this determination shall be construed so asto relieve the company of its obligations under anystate, local, or federal laws or regulations.Access to Boeing-Everett Model 777 assembly by theU.S. Environmental Protection Agency (EPA),Ecology, and state or local regulatory personnel shallbe permitted upon request for the purpose ofcompliance assurance inspections. Failure to allowaccess is grounds for revocation of this determinationof approval.II.A.2(c)Documentationon FileII.A.2( d)(ii)Spray Boothsand OtherParticulateControlBoothsIl.A.2( d)(ii)Spray Boothsand OtherParticulateControlBoothsNMRNMREU 3. 134Order ofApproval No.3913(5/22/95),Condition #4Boeing shall not emit 40 or more tons per year ofVOC fi'om its CIC application to 747 and 767 aircraft.Boeing shall report this amount annually pursuant toRegulation I.II.A.2(p)EmissionEstimatesRequired byPSD or Orderof ApprovalPermitConditionBoeing-Everett Permit, issued September 12, 2008; Administrative Amendment 3: October 10, 2012