Air Operating Permit - Puget Sound Clean Air Agency

EMISSION UNIT SPECIFIC REQUIREMENTSLB.3 Coating, Cleaning, and Depainting OperationsPermit No. 13120Expiration Date: September 12, 2013Page 64 of291EU 3. 123 PSD #91-06, Surface coating equipment will have a transfer II.A.I(d)Amendment efficiency of 60 percent or greater with the following Work Practice2, Condition exceptions: Inspection#5,6/13/05I. Application of CIC at the Final Body Join andFinal Assembly tools positions as provided inApproval Condition 6.2. In the lower lobe of the aircraft body sections.3. In aircraft sections that PSCAA agree are toodifficult to reach with a spray gun.4. Touchup and repair operations meeting thefollowing definition: That portion of the coatingoperation that is the incidental application of coatingused to cover minor imperfections in the coating finishor to achieve complete coverage. This definitionincludes out-of-sequence or out-of-cycle coating.5. Stenciling, lettering, and identification markingusing an airbrush. .6. Hand-held aerosol cans.EU 3. 124 PSD #91-06, When spray-applying crcs at the Final Body Join and Il.A.l(d)Amendment Final Assembly tool positions, Boeing shall use air- Work Practice2, Condition assisted aidess and aidess spray gun painting systems Inspection#6, 6113/05 and near-surface spraying techniques or otherequipment/technique combinations with equivalent orbetter transfer efficiencies.Boeing-Everett Permit, issued September 12, 2008; Administrative Amendment 3: October 10, 2012