Air Operating Permit - Puget Sound Clean Air Agency

EMISSION UNIT SPECIFIC REQUIREMENTSLB.3 Coating, Cleaning, and Depainting OperationsPermit No. 13120Expiration Date: September 12,2013Page 71 of291EU 3. 143Order ofApproval No.7509(7117/98),Condition #6The aerospace coating applications in the vinyl repairspray booth shall comply with the standards for primerand topcoat applications in 40 CPR 63.745.n.A.2(h)AerospaceNESHAPCoatingMonitoringandRecordkeepingProcedure,II.A.2(i)AerospaceNESHAPPressureDrop/WaterFlow RateMonitoringandRecordkeepingProcedure40 CFR63.750(c)­(I)EU 3. 144Order ofApproval No.6407(2/28/96),Condition #4As an alternate means of compliance with RegulationII, 3.09(c), application methods other than those listedin 3.09(c) may be used when applying TPC if theVOC content of the TPC is negligible (e.g., less thanI % by wt.), as determined from the manufacturer'sMSDS.II.A.I(d)Work PracticeInspectionEU 3. 145Order ofApproval No.7210(11120197),Condition #3Boeing shall install and maintain a differentialpressure gauge to measure the pressure drop across thedry filter particulate control system. The acceptablerange for the gauge shall be marked on or nearby thereadout or gauge.n.A.2(i)AerospaceNESI-IAPPressureDrop/WaterFlow RateMonitoringandRecordkeepingProcedureBoeing-Everett Permit, issued September 12, 2008; Administrative Amendment 3: October 10, 2012