Air Operating Permit - Puget Sound Clean Air Agency

II. MONITORING, MAINTENANCE, AND RECORDKEEPING Permit No. 13120Expiration Date: September 12, 2013Page 229 of2918.53), or an organic HAP content limitshown in Table 7 of 40 CFR 63 SubpmiWWWW (II.A.2(z».8.54 through EU 8.58) on a 12-monthrolling average basis, I-year after theappropriate compliance date, orii) Boeing demonstrates by using theappropriate values in Table 3 of 40 CFR63 Subpart WWWW (EU 8.48 through EU8.53) that all resins considered individuallymeet the appropriate organic HAPcontents, oriii) Boeing demonstrates by using theappropriate values in Table 7 of 40 CFR63 Subpart WWWW (I1.A.2(z» that theweighted average of all resins for eachresin type and application method meet theappropriate organic HAP contents.[40 CPR Part 63 Subpart WWWW, Table 8, 8125/05]For ...TABLE 9 OF SUBPART WWWWThat must meet the followingInitial compliance will bestandard ... demonsh'ated if ...A closed orBoeing submits a certified statement inUncover, unwrap or expose only onemoldingthe notice of compliance status thatcharge per mold cycle pel'operationonly one charge is uncovered,compression/injection molding machine.usingnnwrapped, or exposed per mold cycleMaterials may be uncovered to feed tocompression/inper compression/injection moldingslitting machines. Materials must bejectionmachine, and materials are recoveredrecovered after slitting.molding.after slitting.Not use cleaning solvents that containHAP, except that styrene may be used inBoeing submits a certified statement incleaning systems, and organic HAPthe notice of compliance status that allcontaining materials may be used to cleanA cleaningcleaning materials, except styrenecured resin from application equipment.operationcontained in closed systems, orApplication equipment includes anymaterials used to clean cured resin fromequipment that directly contacts resinapplication equipment contain no HAP.between storage and applying resin to themold or reinforcement.Boeing submits a certified statement inKeep containers that store HAP-A HAP-the notice of compliance status that allcontaining materials closed or coveredcontainingHAP-containing storage containers areexcept during the addition or removal ofmaterialskept closed or covered except whenmaterials. Bulk HAP-containingstorageadding or removing materials, and thatmaterials storage tanks may be vented asoperationany bulk storage tanks are vented onlynecessary for safety.as necessary for safety.An existing or Use mixer covers with no visible gaps Boeing submits a certified statement innew mixing 01' present in the mixer covers, except that the notice of compliance status thatBoeing-Everett Permit, issued September 12, 2008,' Administrative Amendment 3: October 10, 2012