Air Operating Permit - Puget Sound Clean Air Agency

EMISSION UNIT SPECIFIC REQUIREMENTSI.B.8 Composite Processing OperationsPermit No. 13120Expiration Date: September 12,2013Page 153 of291EU 8.56Option 2:Boeing must demonstrate that, for thoseapplications that exist at the facility, onaverage, the facility meets the individualorganic HAP emissions limits for eachcombination of operation type and resinapplication method or gel coat type, asshown in Table 3 to Subpart WWWW.on FileII.A.2(x)ReinforcedPlasticCompositesNESHAPEmissions FactorAveragingOptionEU 8.5740 CFR 63.5810(c)(8/25105)Option 3:Boeing must demonstrate each month thatthe facility is in compliance with theapplicable weighted average organic HAPemission limits in Table 3 to SubpartWWWW.II.A.2(c)Documentationon FileII.A.2(y)ReinforcedPlasticCompositesNESHAPWeightedAverageEmission FactorOptionEU 8.5840 CFR 63.5810(d)(8/25/05)Option 4:Meet the organic HAP emissions limit forone application method and use the Sameresin(s) for all application methods of thatresin type.This option is limited to resins of the sametype. The resin types for which this optionmay be used are non corrosion-resistant,corrosion-resistant andlor high strength, andtoolingII.A.2(c)Documentationon File1l.A.2(z)ReinforcedPlasticCompositesNESHAP Use ofSame ResinAcross DifferentOperationsOptionBoeing-Everett Permit, issued September 12, 2008; Administrative Amendment 3: October 10, 2012