Air Operating Permit - Puget Sound Clean Air Agency

EMISSION UNIT SPECIFIC REQUIREMENTSLB.8 Composite Processing OperationsPermit No. 13120Expiration Date: September 12,2013Page 141 of291EU 8.9 40 CPR 63.I(c)(I), Reinforced plastic composites NMR63.4 (415102) manufacturing operations must comply with40 CFR 63 Subpart A and WWWW, as40 CPR 63.5925 applicable.(4121103)EU 8.10 40 CPR 63.2 (4/22/04) Definitions in 40 CPR 63 Subpart A and 40 NMR40 CPR 63.5935 CPR 63 Subpart WWWW apply to Boeing.(8/25105) As discussed in Table 15 to 40 CPR 63Subpart WWWW, in case of a conflict,Subpart WWWW definitions takeprecedence over Subpart A definitions.EU 8.11 40 CFR 63.5 (4/5102) Boeing shall comply with preconstruction NMRreview requirements.EU8.12(4/20106) standards in 40 CPR 63 Subpart WWWWby April 21, 2006 or shall accept and meet40 CPR 63.5800an enforceable HAP emission limit below(4/21103)the major source threshold prior to April 21,Table 2 of 40 CPR 63 2006.Subpart WWWW If Boeing meets an organic I-JAP emission(4/21103) standard based on a 12-month rollingaverage, Boeing must begin collecting dataon April 21, 2006 in order to demonstratecompliance (see also EU 8.63).NMREU 8.13 CPR 63.6(e)(1) Boeing shall operate and maintain affected II.A.I(d) Work(4/20106) source consistent with safety and good air Practicepollution control practices for minimizing Inspection40 CPR 63.5835(c) emissions. During a period of startup,(4/20106) shutdown, or malfunction, Boeing shallreduce emissions to the greatest extent thatis consistent with safety and good airpollution control practices. Malfunctionsmust be corrected as soon as practicableafter their occurrence. During periods ofstartup, shutdown, or malfunction, reduceemissions to the greatest extent which isconsistent with safety and good air pollutioncontrol practices.Boeing-Everett Permit, issued September i2, 2008,' Administrative Amendment 3: October 10,2012