ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
SYSTEM UTILITY > TELNET CLIENT > ESCAPE CHAR
Write security: 5; Read security: 5
Defines the Telnet client escape character. Typing the combination characters will close the active telnet
session to the remote unit specified in the ADDRESS field.
Option Keystroke
^ ] + ]
^ \ + \
^ [ + [
^ ^ + + 6
^ _ + + -
SYSTEM UTILITY > TELNET CLIENT > PORT
Write security: 5; Read security: 5
Defines the IP port used in the remote login session. Default (for Telnet) is 23.
SYSTEM UTILITY > TELNET CLIENT > CONNECT
Write security: 5; Read security: 5
Activator used to start a Telnet session to the remote unit configured in the ADDRESS field.
SYSTEM UTILITY > CLIENT STATUS
Write security: 5; Read security: 5
Displays status from current Telnet client sessions.
SYSTEM UTILITY > CLIENT STATUS > USER NAME
Displays the username (from access passwords list) that has an active Telnet client session.
SYSTEM UTILITY > CLIENT STATUS > SESSION ID
Displays the remote unit’s IP address followed by the IP port of an active Telnet client session (in the
format IP.IP.IP.IP:PORT).
SYSTEM UTILITY > REBOOT SYSTEM
Write security: 0; Read security: 0
Reboots the ATLAS 550 system. When you select this command, the following message displays:
** WARNING ** This will reboot the entire system and service will be interrupted!
Press Y to reboot the system or N to cancel the command.
100 © 2004 ADTRAN, Inc. 61200305L2-1B