ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
MODULES MENU (LEGACY DATA OPTION MODULE)
The ATLAS 550 system controller automatically detects the presence of the Legacy Data Option Module
when they are installed in the system (listed as LEGACY-4). To see the menus for the Legacy Data Option
Module via the terminal menu, use the arrow keys to scroll to the MODULES menu and press to
access the module choices. Refer to the Legacy Data Option Module Quick Start Guide for a menu tree
containing a complete listing of menus.
MODULES (LEGACY-4) > INFO > PART NUMBER
Read security: 5
Displays the part number of the module.
MODULES (LEGACY-4) > INFO > SERIAL NUMBER
Read security: 5
Displays the serial number of the module.
MODULES (LEGACY-4) > INFO > ASSEMBLY REVISION
Read security: 5
Displays the assembly revision of the module.
MODULES (LEGACY-4) > INFO > FIRMWARE REVISION
Read security: 5
Displays the current firmware revision of the selected module.
MODULES (LEGACY-4) > INFO > PROCESSOR ID
Read security: 5
Displays the processor ID of the selected module.
MODULES (LEGACY-4) > SIGNAL STATUS
Read security: 5
Shows the status of key DTE interface signals. An asterisk (*) indicates the presence of a signal and a
hyphen (-) indicates no signal present.
MODULES (LEGACY-4) > SIGNAL STATUS > PORT
Read security: 5
Displays the operating port number. There are four available ports on the Legacy Data Option Module.
MODULES (LEGACY-4) > SIGNAL STATUS > DTE SIGNALS
Read security: 5
The following signals are monitored (these options are read-only):
DTR Data terminal ready from DTE DCD Data carrier detect to DTE
DSR Data set ready to DTE CTS Clear to send to DTE
RTS Request to send from DTE
160 © 2004 ADTRAN, Inc. 61200305L2-1B