ATLAS 550 System Manual - Adtran

ATLAS 550 System Manual Section 4 User Interface Guide
RECEIVE IDLE CODE
Write security: 3; Read security: 5
Defines the idle code (either marks or flags) the ATLAS 550 should expect on the selected packet
endpoint.
DEDICATED MAPS (PKT VOICE - PACKET VOICE ENDPOINT)
DEDICATED MAPS (PKT VOICE) > CREATE/EDIT MAPS > CONNECTS
Write security: 3; Read security: 5
Enters the dedicated map connections. Press to activate the submenus.
DEDICATED MAPS (PKT VOICE) > CREATE/EDIT MAPS > CONNECTS > TO SLOT/SERVICE
Write security: 3; Read security: 5
Select PKT VOICE to activate a list of available packet endpoints in the TO PORT field.
DEDICATED MAPS (PKT VOICE) > CREATE/EDIT MAPS > CONNECTS > TO PORT/PEP
Write security: 3; Read security: 5
Press and select the appropriate packet endpoint from the drop-down list.
DEDICATED MAPS (PKT VOICE) > CREATE/EDIT MAPS > CONNECTS > TO/FROM CONFIG
Write security: 3; Read security: 5
Specifies the configuration for the TO/FROM connection. The following selections apply to the PKT VOICE
connections:
DLCI
Write security: 3; Read security: 5
Press and select the appropriate DLCI from the drop-down list.
VOICE PORT
Write security: 3; Read security: 5
Identifies the voice port address of the remote unit. Express units support ports 1 and 2. A remote
ATLAS supports ports 1 through 255.
CONFLICT REPORT
Write security: 3; Read security: 5
Describes existing conflicts. Potential problems include DLCI unavailable or Voice port already in
use.
61200305L2-1B © 2004 ADTRAN, Inc. 245