ATLAS 550 System Manual - Adtran

ATLAS 550 System Manual Section 4 User Interface Guide
MODULES (NXT1HSSI) > CONFIGURATION > PORT
Read security: 5
Displays the operating port number. There are four available T1 ports on the NxT1 HSSI and NxT1
HSSI/V.35 Option Modules.
MODULES (NXT1HSSI) > CONFIGURATION > PORT NAME
Write security: 3; Read security: 5
Accepts any alpha-numeric name up to 16 characters long, to uniquely identify each T1 port on the NxT1
HSSI and NxT1 HSSI/V.35 Option Modules.
MODULES (NXT1HSSI) > CONFIGURATION > FRAME
Write security: 2; Read security: 5
This field must be set to match the frame format of the circuit to which it is connected, available from the
network supplier. Choose either D4 or ESF.
MODULES (NXT1HSSI) > CONFIGURATION > CODE
Write security: 2; Read security: 5
Set this field to match the line code of the circuit to which it is connected (this information is available
from the network supplier). Choose either AMI (Alternate Mark Inversion) or B8ZS (Bipolar Eight Zero
Substitution).
MODULES (NXT1HSSI) > CONFIGURATION > TX YEL
Write security: 3; Read security: 5
Controls the transmission of yellow alarms. Choose either ON or OFF.
MODULES (NXT1HSSI) > CONFIGURATION > LBO
Write security: 2; Read security: 5
Selects the Line Build Out (LBO) for the network interface. When connecting an ATLAS 550 port to a
DSX-1 interface, this parameter is typically set to match the distance (in feet) between the ATLAS 550 and
the device with which it is connecting. When you select this item, a list of choices displays (0 dB, -7.5 dB,
-15 dB, -22 dB, 266 FT, 399 FT, 533 FT, 655 FT). Select the appropriate option.
MODULES (NXT1HSSI) > TEST
Write security: 5; Read security: 5
These options initiate different types of tests and display test results.
MODULES (NXT1HSSI) > TEST > PORT
Read security: 5
Displays the operating port number. There are four available T1 interfaces on the NxT1 HSSI and NxT1
HSSI/V.35 Option Modules.
61200305L2-1B © 2004 ADTRAN, Inc. 165