ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
CIRCUIT STATUS > BKUP STATUS (BACKUP STATUS)
Read security: 5
The displayed string indicates the current status of the dedicated line. The following messages may display
in the BACKUP STATUS field.
FB Backup was forced through the interface menu.
FR Restore was forced through the interface menu.
PRIMARY The link is active.
DIALING Attempting to dial the backup link.
BACKUP FAILED Exceeded MAX NUM REDIALS.
RETRY DIAL [NUM] Will retry backup dialing in [num] seconds.
PRIMARY DOWN The link is in error and waiting on backup.
ANSWERING The link is answering a backup endpoint.
BACKUP The link is in backup.
CIRCUIT STATUS > LINE STATUS
Read security: 5
Displays the overall status of the connection. The following messages may display in the LINE STATUS
field.
UNKNOWN Endpoints do not support (or are not configured) for monitoring.
ACTIVE The connection is up and running.
INACTIVE The connection is down due to configuration (i.e., DTR is down).
DATA ALARM The FROM endpoint is in data alarm.
NETWORK ALARM The TO endpoint is in network alarm.
NET/DATA ALARM Both the FROM endpoint and the TO endpoint are in alarm.
DATA UNKNOWN The status of the FROM endpoint is unknown.
CIRCUIT STATUS > DELAY
When present, this indicates that one ATLAS 550 has detected a change in state and is counting down to
delay/restore.
CIRCUIT STATUS > TEST
Write security: 1; Read security: 5
Contains a test activator and test status displays for dedicated dial backup circuits.
CIRCUIT STATUS > TEST > LAST RUN TIME
Read security: 5
(Not visible until a circuit has been tested.) Displays the date and time of the last test call made through
this dedicated dial backup circuit.
248 © 2004 ADTRAN, Inc. 61200305L2-1B