ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
MODULES (FXO-4/8) > CONFIG > 2W IMPEDANCE
Read security: 5
2-wire input impedance is set to either 600 Ω +2.16 µF or 900 Ω +2.16 µF. This is a read-only field.
MODULES (FXO-4/8) > CONFIG > CODING SCHEME
Read security: 5
Displays the current PCM coding scheme. Currently only µ-LAW is supported.
MODULES MENU (OCTAL E&M OPTION MODULE)
The ATLAS 550 system controller automatically detects the presence of the Octal E&M Option Module
when it is installed in the system (listed as E&M-8). To see the menus for the Octal E&M Option Module
via the terminal menu, use the arrow keys to scroll to the MODULES menu and press to access the
module choices. Refer to the Octal E&M Option Module Quick Start Guide for a menu tree containing a
complete listing of menus.
MODULES (E&M-8) > INFO > PART NUMBER
Read security: 5
Displays the part number of the module.
MODULES (E&M-8) > INFO > SERIAL NUMBER
Read security: 5
Displays the serial number of the module.
MODULES (E&M-8) > INFO > ASSEMBLY REVISION
Read security: 5
Displays the assembly revision of the module.
MODULES (E&M-8) > INFO > FIRMWARE REVISION
Read security: 5
Displays the current firmware revision of the selected module.
MODULES (E&M-8) > INFO > PROCESSOR ID
Read security: 5
Displays the processor ID of the selected module.
MODULES (E&M-8) > STATUS
Read security: 5
Displays the status of each of the eight E&M ports.
156 © 2004 ADTRAN, Inc. 61200305L2-1B