ATLAS 550 System Manual - Adtran

ATLAS 550 System Manual Section 4 User Interface Guide
PRIMARY | BACKUP SELECTION
Write security: 3; Read security: 5
Allows you to define a sublink as a primary or a backup sublink. PRIMARY defines a normal
sublink and includes the menus ENABLE BACKUP SUPPORT, BACKUP PACKET ENDPT, and BACKUP
SUBLINK. BACKUP defines a backup sublink and includes the menus PRIMARY PACKET ENDPT and
PRIMARY SUBLINK.
ENABLE BACKUP SUPPORT
Write security: 3; Read security: 5
(Available for Primary packet endpoints only.) YES displays the backup menus. NO hides the
backup menus.
BACKUP PACKET ENDPT
Write security: 3; Read security: 5
(Visible only if ENABLE BACKUP SUPPORT is set to YES.) Selects BACKUP PACKET ENDPT that
contains the BACKUP SUBLINK to be tied to this sublink.
BACKUP SUBLINK
Write security: 3; Read security: 5
(Visible only if ENABLE BACKUP SUPPORT is set to YES.) Selects the BACKUP SUBLINK to be tied to
this sublink.
PRIMARY PACKET ENDPT
Write security: 3; Read security: 5
(Visible only for Backup packet endpoints.) Selects the PRIMARY PACKET ENDPT that contains the
PRIMARY SUBLINK to be tied to this sublink.
PRIMARY SUBLINK
Write security: 3; Read security: 5
(Visible only for Backup packet endpoints.) Selects the PRIMARY SUBLINK to be tied to this
sublink.
The fields BACKUP MODE, SWITCH ON SUBLINK DOWN, SWITCH ON LMI INACTIVE, SWITCH ON
BACKUP ACTIVE, BACKUP DELAY IN SECONDS, and RESTORE DELAY IN SECONDS display if
PRIMARY (with BACKUP SUPPORT) or BACKUP is enabled.
61200305L2-1B © 2004 ADTRAN, Inc. 201