ATLAS 550 System Manual - Adtran

ATLAS 550 System Manual Section 4 User Interface Guide
ROUTER > IP > GLOBAL > DEFAULT GATEWAY COST
Write security: 2; Read security: 2
Defines the default gateway cost. Enter the default gateway metric by pressing and entering a
decimal number.
ROUTER > IP > PING
Write security: 2; Read security: 2
Allows you to send pings (ICMP requests) to devices accessible via the network.
Only one ping session can be active at a time.
ROUTER > IP > PING > IP ADDRESS
Write security: 2; Read security: 2
Specifies the IP address to ping.
ROUTER > IP > PING > COUNT
Write security: 2; Read security: 2
Specifies the number of pings to send. The maximum value is 99.
ROUTER > IP > PING > SIZE
Write security: 2; Read security: 2
Specifies the size in bytes of the data portion of the ping request. The default value is 64 bytes, and the
maximum size is 1024 bytes.
ROUTER > IP > PING > TIMEOUT
Write security: 2; Read security: 2
Specifies the time in milliseconds to wait for the ping reply before timing out. The default timeout is three
seconds, and the maximum timeout value is ten seconds.
ROUTER > IP > PING > ROUND TRIP MIN
Read security: 2
Displays the minimum round trip time of the ping request/reply of the current set of pings.
ROUTER > IP > PING > ROUND TRIP AVG
Read security: 2
Displays the average round trip time of the ping request/reply of the cur-rent set of pings.
ROUTER > IP > PING > ROUND TRIP MAX
Read security: 2
Displays the maximum round trip time of the ping request/reply of the cur-rent set of pings.
61200305L2-1B © 2004 ADTRAN, Inc. 223