ATLAS 550 System Manual - Adtran

More documents

Recommendations

Info

Section 4 User Interface Guide ATLAS 550 System Manual MODULES (USSI-2) > ALARM STATUS > ALARMS Read security: 5 Displays an alarm condition on the ATLAS 550 unit. SLIP A rate mismatch exists between the DTE clock and the network-side clock (as set by DS0 assignment). PLL The USSI port is not able to lock onto the clock provided by the network interface. ZERO The DTE is sending an excessive number of consecutive zeroes to the network interface. NO EXT CLK The DTE is not providing an external transmit clock. This alarm displays only if the USSI port is configured to get its transmit clock from the DTE. PKT EP ALM A packet endpoint has detected missing or incorrect framing. MODULES (USSI-2) > DTE STATUS Read security: 5 Shows the status of key DTE interface signals. An asterisk (*) indicates the presence of a signal and a hyphen (-) indicates no signal present. MODULES (USSI-2) > DTE STATUS > PRT Read security: 5 Operating port number. There are 2 available interfaces on the Dual USSI Option Module. MODULES (USSI-2) > DTE STATUS > DTE STATUS The following signals are monitored (these options are read-only): RTS Request to send from DTE. CTS Clear to send to DTE. DTR Data terminal ready from DTE. DSR Data set ready to DTE. DCD Data carrier detect to DTE. RI Ring indicate to DTE. TD Transmit data from the DTE. RD Receive data toward the DTE. EC External clock present. MODULES (USSI-2) > DATA RATE Read security: 5 Displays the data rate at which each USSI port is currently operating. A port’s data rate is determined by the number of DS0s assigned to it and the rate per DS0 associated with the active maps. 136 © 2004 ADTRAN, Inc. 61200305L2-1B
ATLAS 550 System Manual Section 4 User Interface Guide MODULES (USSI-2) > DATA RATE > PORT Read security: 5 Displays operating port. There are 2 available interfaces on the Dual USSI Option Module. MODULES (USSI-2) > DATA RATE > RATE Read security: 5 Displays the data rate of the selected port. MODULES (USSI-2) > INBAND STATS Write security: 5; Read security: 5 Provides information on the inband channel statistics. MODULES (USSI-2) > INBAND STATS > PORT Read security: 5 Operating port number. There are 2 available interfaces on the Dual USSI Option Module. MODULES (USSI-2) > INBAND STATS > RX FRAMES Read security: 5 The number of frames received on the operating port since system startup. MODULES (USSI-2) > INBAND STATS > TX FRAMES Read security: 5 The number of frames transmitted from the operating port since system startup. MODULES (USSI-2) > INBAND STATS > RX BYTES Read security: 5 The number of bytes received on the operating port since system startup. MODULES (USSI-2) > INBAND STATS > TX BYTES Read security: 5 The number of bytes transmitted from the operating port since system startup. MODULES (USSI-2) > INBAND STATS > RESET STATS Write security: 5; Read security: 5 Clears inband statistic results. MODULES (USSI-2) > PLL/FIFO Read security: 5 Displays the Phase Lock Loop (PLL) and FIFO status. MODULES (USSI-2) > PLL/FIFO > PORT Read security: 5 Indicates the operating port. There are 2 available interfaces on the Dual USSI Option Module. 61200305L2-1B © 2004 ADTRAN, Inc. 137
Page 1 and 2:
61200305L2-1B August 2004 ATLAS 550
Page 3 and 4:
ATLAS 550 System Manual Revision Hi
Page 5 and 6:
ATLAS 550 System Manual Compliance
Page 7 and 8:
ATLAS 550 System Manual Industry Ca
Page 9 and 10:
ATLAS 550 System Manual Affidavit f
Page 11 and 12:
ATLAS 550 System Manual Warranty an
Page 13 and 14:
ATLAS 550 System Manual Customer Se
Page 15 and 16:
Table of Contents Section 1 System
Page 17 and 18:
SYSTEM DESCRIPTION Provides an over
Page 19 and 20:
ATLAS 550 System Manual Section 1 S
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
ENGINEERING GUIDELINES Provides equ
Page 27 and 28:
ATLAS 550 System Manual Section 2 E
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
NETWORK TURNUP PROCEDURE Provides s
Page 53 and 54:
ATLAS 550 System Manual Section 3 N
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
USER INTERFACE GUIDE Provides detai
Page 65 and 66:
ATLAS 550 System Manual Section 4 U
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86: ATLAS 550 System Manual Section 4 U
Page 135: ATLAS 550 System Manual Section 4 U
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
DETAIL LEVEL PROCEDURES DLP-1 Conne
Page 311 and 312:
DLP-1 Connecting a VT100 Terminal o
Page 313 and 314:
DLP-2 Logging in to the ATLAS 550 I
Page 315 and 316:
DLP-3 Setting IP Parameters for the
Page 317 and 318:
DLP-4 Verifying Communications Over
Page 319 and 320:
ATLAS 550 System Manual Section 5 D
Page 321 and 322:
DLP-5 Adding and Removing Users and
Page 323 and 324:
DLP-6 Updating the Firmware Using T
Page 325 and 326:
Page 327 and 328:
DLP-7 Updating the Firmware Using X
Page 329 and 330:
Page 331 and 332:
DLP-8 Saving the Current Configurat
Page 333 and 334:
DLP-9 Loading a Configuration Using
Page 335 and 336:
DLP-10 Saving and Transferring a Cu
Page 337 and 338:
DLP-11 Loading a Configuration Usin
Page 339 and 340:
DLP-12 Connecting the ATLAS 550 to
Page 341 and 342:
DLP-13 Using the ADTRAN Utility Sys
Page 343 and 344:
Page 345 and 346:
DLP-14 Connecting the Alarm Contact
Page 347 and 348:
Page 349 and 350:
DLP-15 Using the Alarm Connections
Page 351 and 352:
CONFIGURATION GUIDES CFG-1 Dial Bac
Page 353 and 354:
CFG-1 Dial Backup for Dedicated T1
Page 355 and 356:
ATLAS 550 System Manual Section 7,
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
SYSTEM EVENT LOGGING Explains the S
Page 367 and 368:
Page 369 and 370:
Page 371 and 372:
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
ADTRAN UTILITIES Provides instructi
Page 381 and 382:
ATLAS 550 System Manual Section 8 A
Page 383 and 384:
Page 385 and 386:
Page 387 and 388:
Page 389 and 390:
MIBS Provides a listing of SNMP Man
Page 391 and 392:
ATLAS 550 System Manual Section 9 M
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
show all

ATLAS 550 System Manual - Adtran

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?