ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
DIAL PLAN (CKT BACKUP) > USER TERM > IFCE CONFIG > RESTORE DELAY
Write security: 3; Read security: 5
The amount of time to delay after clearing an alarm before coming out of backup. This only applies to
originating endpoints. If the circuit goes into alarm before this time has expired, the endpoint will remain
in backup.
DIAL PLAN (CKT BACKUP) > USER TERM > IFCE CONFIG > MAX NUM REDIALS
Write security: 3; Read security: 5
The backup endpoint will attempt this many retries before giving up and declaring a backup failure. This
only applies to originating endpoints.
DIAL PLAN (CKT BACKUP) > USER TERM > IFCE CONFIG > REDIAL TIMER
Write security: 3; Read security: 5
The amount of time delayed between a failed backup call and the redial. This only applies to originating
endpoints.
DIAL PLAN (CKT BACKUP) > USER TERM > IFCE CONFIG > ENABLE SCHEDULE
Write security: 3; Read security: 5
Use this menu to schedule the times when backup is enabled. The following selections are available for the
ENABLE SCHEDULE menu item.
ENABLE TIME
Write security: 3; Read security: 5
This is the time of day to enable dial backup.
DISABLE TIME
Write security: 3; Read security: 5
This is the time of day to disable dial backup. If the disable time is earlier than the enable time,
backup monitoring will be active across midnight.
DAYS ENABLED
Write security: 3; Read security: 5
Use this record to enable/disable backup monitoring on particular days of the week.
DIAL PLAN (CKT BACKUP) > USER TERM > IFCE CONFIG > TEST CALL
Write security: 3; Read security: 5
This only applies to originating endpoints. Use this menu to schedule regularly occurring test calls. The
following selections are available for the TEST CALL menu item.
PERIOD
Write security: 3; Read security: 5
How often test calls are to be made
302 © 2004 ADTRAN, Inc. 61200305L2-1B