ATLAS 550 System Manual - Adtran

ATLAS 550 System Manual Compliance Information
Compliance Information
FCC regulations require that the following information be provided to the customer:
1. This equipment complies with Part 68 of the FCC rules and requirements adopted by ACTA. On
the equipment housing is a label showing the FCC registration number and ringer equivalence
number (REN). If requested, provide this information to the telephone company.
2. If this equipment causes harm to the telephone network, the telephone company may temporarily
discontinue your service. If possible, advance notification is given; otherwise, notification is given
as soon as possible. The telephone company will advise the customer of the right to file a
complaint with the FCC.
3. The telephone company may make changes in its facilities, equipment, operations, or procedures
that could affect the proper operation of this equipment. Advance notification and the opportunity
to maintain uninterrupted service are given.
4. If experiencing trouble with this equipment, please contact ADTRAN for repair and warranty
information. The telephone company may require this equipment to be disconnected from the
network until the problem is been corrected or it is certain the equipment is not malfunctioning.
5. This unit contains no user-serviceable parts.
6. An FCC compliant telephone cord with a modular plug is provided with this equipment. This
equipment is designed to be connected to the telephone network or premises wiring using an FCC
compatible modular jack, which is complaint with Part 68 and requirements adopted by ACTA.
7. The following information may be required when applying to your local telephone company for
leased line facilities.
Part # FCC Reg. Number Service Type REN/SOC FIC USOC
1200307L1 HDCUSA-34602-DE-N
04DU9-BN
1200307L2 US:HDCDENAN1200307L2 04DU9-BN
1200314L1 HDCUSA-34601-DE-N 04DU9-BN
1.544 Mbps - SF
1200314L2
1200346L1
US:HDCDENAN1200314L2
US:HDCDENAN1200346L1
1.544 Mbps - SF and B8ZS
1.544 Mbps - ESF
6.0 N
04DU9-DN
04DU9-1KN
1200346L2 US:HDCDENAN1200346L2
1.544 Mbps - ESF and B8ZS
04DU9-1KN
1200755L1 HDCUSA-34601-DE-N 04DU9-1SN
RJ-48C
1200755L2 US:HDCDENAN1200755L2 04DU9-1SN
1200310L1 HDCUSA-34761-KX-N Analog Loop Start 0.1B/9.0F 02LS2 RJ-11C
1200329L1 HDCUSA-34761-KX-N Analog Loop Start 0.1B/9.0F 02LS2 RJ-11C
1200341L1 HDCUSA-44569-MD-E Analog Loop Start 0.8 B N/A RJ-11C
1200315L1 HDCUSA-34956-DE-N Basic Rate ISDN 6.0 N 02IS5 RJ-49C
1200327L1 US:HDCDENAN1200327L1 Basic Rate ISDN 6.0 N 02IS5 RJ-49C
1200764L1 US:HDCXDNAN1200764L1 Basic Rate ISDN 6.0 N 02IS5 RJ-49C
8. The REN is used to determine the quantity of devices which may be connected to the telephone
line and still have all of those devices ring when the number is called. Excessive RENs on the
telephone line may result in the devices not ringing in response to an incoming call. In most, but
not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices
that may be connected to a line, as determined by the total RENs, contact the local telephone
company.
9. This equipment may not be used on coin service provided by the telephone company. Connection
to party lines is subject to state tariffs. Contact your state public utility commission or corporation
commission for information.
61200305L2-1B © 2004 ADTRAN, Inc. 5