ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
Example: The ORIGINAL# field contains $ and the SUBSTITUTED# field contains ,256$. All calls routed out
this connection will be delayed .5 seconds and contain a 256 prefix.
Wildcards used in the SUBSTITUTED# field are only valid when used in the same position
(relative to the end of the digit string) as the ORIGINAL# field.
DIAL PLAN > GLOBAL PARAM
Write security: 2; Read security: 5
Sets ATLAS 550 options which apply to all switched operations, both incoming and outgoing calls.
DIAL PLAN > GLOBAL PARAM > END OF NUMBER TIMEOUT
Write security: 3; Read security: 5
Sets the length of time ATLAS 550 waits before assuming the outgoing dialed number is complete. The
default value is six seconds. This timeout will only be invoked if the dialed number does not match one of
the patterns set in the NUMBER COMPLETE TEMPLATE menu (see Nbr Complete Templates below).
DIAL PLAN > GLOBAL PARAM > COUNTRY CODE
Write security: 3; Read security: 5
The country code. Enter your international country code using only digits. For the United States, enter 1.
DIAL PLAN > GLOBAL PARAM > AREA OR CITY CODE
Write security: 3; Read security: 5
The local area code. Use for sending caller ID to the network.
DIAL PLAN > GLOBAL PARAM > NBR COMPLETE TEMPLATES
Write security: 3; Read security: 5
Sets completed number patterns for outgoing calls so that ATLAS 550 recognizes when the phone number
is complete. Fields include the index number (#) and PATTERN. For example, a local number will be 7
digits long while a long distance (1+ area code + number) will be 11 digits long. The ATLAS 550 defaults
cover almost any installation, and these templates should not require any additional user input – except for
unusual circumstances. The template allows the use of the following wildcard inputs to define numbers:
X = Any single digit
N = Any single digit 2 through 9
911 = This specific number
[1,2,3...] = A single digit in this group
258 © 2004 ADTRAN, Inc. 61200305L2-1B