15.01.2013 Views

ATLAS 550 System Manual - Adtran

ATLAS 550 System Manual - Adtran

ATLAS 550 System Manual - Adtran

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Section 4 User Interface Guide <strong>ATLAS</strong> <strong>550</strong> <strong>System</strong> <strong>Manual</strong><br />

DIAL PLAN (FXO) > USER TERM<br />

Write security: 3; Read security: 5<br />

This menu allows the user to define option parameters for ports which terminate an analog FXO<br />

connection from the Network (PSTN).<br />

DIAL PLAN (FXO) > USER TERM > IFCE CONFIG<br />

Write security: 3; Read security: 5<br />

Specifies the configuration parameters for the endpoint.<br />

DIAL PLAN (FXO) > USER TERM > IFCE CONFIG > PORTS AVAILABLE<br />

Write security: 3; Read security: 5<br />

Indicates which ports of the Quad/Octal FXO Option Modules have been defined in this switched endpoint<br />

(indicated by “! “), in another switched endpoint (indicated by “s”), or in a DEDICATED MAP (indicated by<br />

“n”). This field is read-only. The following characters may display in this field:<br />

0-9 This port is available.<br />

* This port is requesting this port for this connection, but the port is not yet activated.<br />

! This port is used by this endpoint.<br />

S This port is used elsewhere in the switched DIAL PLAN.<br />

S This port is in the switched dial plan and conflicts with this endpoint.<br />

N This port is used in one or more DEDICATED MAPS.<br />

N This port is in one or more DEDICATED MAPS, and conflicts with this endpoint.<br />

• This port is the wrong kind of port for this endpoint.<br />

DIAL PLAN (FXO) > USER TERM > IFCE CONFIG > NUMBER OF PORTS<br />

Write security: 3; Read security: 5<br />

Specifies the number of ports <strong>ATLAS</strong> <strong>550</strong> uses for this endpoint.<br />

DIAL PLAN (FXO) > USER TERM > IFCE CONFIG > SIGNALING METHOD<br />

Write security: 3; Read security: 5<br />

Defines to the <strong>ATLAS</strong> <strong>550</strong> the type of signaling (DPT) to be used across this trunk. The signaling selected<br />

needs to match the signaling being provided by the network (PSTN).<br />

DPT mode operation configures the <strong>ATLAS</strong> <strong>550</strong>to send DID digits out the USER TERM port toward the user<br />

equipment. DPT mode is one-way operation only. Outbound calls originating from the user equipment will<br />

not be processed.<br />

The <strong>ATLAS</strong> <strong>550</strong> converts signaling types between two endpoints (network or user terms).<br />

288 © 2004 ADTRAN, Inc. 61200305L2-1B

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!