ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
MODULES (LEGACY-4) > PORT STATS > ASYNC/SYNC STATS > PAR ERR
Read security: 5
(Parity Errors) Displays the total number of received frames containing parity errors.
MODULES (LEGACY-4) > PORT STATS > ASYNC/SYNC STATS > BREAKS
Read security: 5
Displays the total number of async break characters received on the port.
MODULES (LEGACY-4) > TEST > PRT
Read security: 5
Displays the operating port number. There are four available ports on the Legacy Data Option Module.
MODULES (LEGACY-4) > TEST > DTE LOCAL LOOPBACK
Write security: 4; Read security: 5
Initiates a DTE local loopback towards the user equipment at the DB-78 port. When ENABLED, all data
received from the DTE will be echoed back to the DTE.
Enabling this test will disrupt data flow on the selected port.
MODULES MENU (NXT1 HSSI AND NXT1 HSSI/V.35 OPTION MODULES)
The ATLAS 550 system controller automatically detects the presence of the NxT1 HSSI and NxT1
HSSI/V.35 Option Modules when they are installed in the system (NxT1 HSSI listed as NXT1 HSSI and
NxT1 HSSI/V.35 listed as NXHSSV35). All menus listed below as NXT1 HSSI apply to both the NxT1
HSSI and NxT1 HSSI/V.35 Option Modules unless otherwise specified.To see the menus for the NxT1
HSSI and NxT1 HSSI/V.35 Option Modules via the terminal menu, use the arrow keys to scroll to the
MODULES menu and press to access the module choices. V.35 is available (on the 1200346L2
module only) when using the optional adapter cable (ADTRAN P/N 3125I081). Some of the following
menus do not apply when configured for V.35 mode. Refer to the NxT1 HSSI/V.35 Option Module Quick
Start Guide for a menu tree containing a complete listing of menus.
MODULES (NXT1 HSSI) > INFO
Read security: 5
Provides information about the module part number, serial number, and board revision.
MODULES (NXT1 HSSI) > INFO > PART NUMBER
Read security: 5
Displays the part number of the module.
162 © 2004 ADTRAN, Inc. 61200305L2-1B