ATLAS 550 System Manual - Adtran

More documents

Recommendations

Info

Section 4 User Interface Guide ATLAS 550 System Manual ENABLE Write security: 2; Read security: 2 Enables/disables this field. Select either STANDARD or SPECIFIED. (DISABLE is not used.) IP STANDARD (DEFAULT) Relays any of the following standard UDP protocols: DHCP, TFTP, DNS, NTP (Network Time Protocol, port 123), NBNS (NetBIOS Name Server, port 137), NBDG (Net BIOS Datagram, port 138), and BootP. SPECIFIED Specifies the UDP port (1 to 65,535) in the UDP Port columns (maximum of three per server). Write security: 2; Read security: 2 Defines the IP address of the server that receives the relay packet. UDP PORTS 1 - 3 Write security: 2; Read security: 2 Specifies the UDP ports to relay. These fields are active only when ENABLE is set to SPECIFIED. DEDICATED MAPS The DEDICATED MAPS menu assigns dedicated connections between any two ports in the ATLAS 550. This section describes the DEDICATED MAPS menu items (see Figure 16). These options are module-dependent; that is, the menu items available depend on the module selected. Figure 16. Dedicated Maps Menu 230 © 2004 ADTRAN, Inc. 61200305L2-1B
ATLAS 550 System Manual Section 4 User Interface Guide DEDICATED MAPS > ACTIVATE MAP Write security: 3; Read security: 5 Activates a dedicated map—automatically or manually. You can have up to five different dedicated maps, each with an optionally specified name. The configuration choices are: AUTO Automatically activates a particular dedicated map at the time and day specified in the ACTIVATE TIME field. MAPS 1 THROUGH 5 Allows you to manually activate a specific dedicated map. To manually activate a dedicated map, highlight the ACTIVATE MAP field and press . Choose the desired dedicated map from the popup menu list. DEDICATED MAPS > CURRENT MAP Read security: 5 Displays the name of the currently active dedicated map (read-only). DEDICATED MAPS > CREATE/EDIT MAPS Write security: 3; Read security: 5 Creates new maps and defines settings, as well as edits existing maps. To add a new map, position the cursor in the index column and press . ATLAS 550 automatically names the maps in the sequence in which they are created. You can change the names with MAP NAME. DEDICATED MAPS > CREATE/EDIT MAPS > # Write security: 3; Read security: 5 Displays the index number of the available maps. DEDICATED MAPS > CREATE/EDIT MAPS > MAP NAME Write security: 3; Read security: 5 Displays the name of the dedicated map. The name can contain up to 57 alpha-numeric characters, including spaces and special characters. To edit the name, press and type in the new name. DEDICATED MAPS > CREATE/EDIT MAPS > SORT TO/FROM Write security: 3; Read security: 5 Specifies sort order based on the end points set in CONNECTS/FROM CONFIG and CONNECTS/TO CONFIG. You can also turn OFF this option. The sort feature is helpful when you are attempting to find a particular connection in a large connection list. DEDICATED MAPS > CREATE/EDIT MAPS > CONNECTS Write security: 3; Read security: 5 Enters the dedicated map connections. Press to activate the submenus. Some of the options available in this submenu change depending on the type of modules selected in the FROM or TO fields. For more information on these submenus, refer to the individual module discussions in this section. You must return to DEDICATED MAPS in the MAIN MENU for changes to take effect. 61200305L2-1B © 2004 ADTRAN, Inc. 231
Page 1 and 2:
61200305L2-1B August 2004 ATLAS 550
Page 3 and 4:
ATLAS 550 System Manual Revision Hi
Page 5 and 6:
ATLAS 550 System Manual Compliance
Page 7 and 8:
ATLAS 550 System Manual Industry Ca
Page 9 and 10:
ATLAS 550 System Manual Affidavit f
Page 11 and 12:
ATLAS 550 System Manual Warranty an
Page 13 and 14:
ATLAS 550 System Manual Customer Se
Page 15 and 16:
Table of Contents Section 1 System
Page 17 and 18:
SYSTEM DESCRIPTION Provides an over
Page 19 and 20:
ATLAS 550 System Manual Section 1 S
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
ENGINEERING GUIDELINES Provides equ
Page 27 and 28:
ATLAS 550 System Manual Section 2 E
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
NETWORK TURNUP PROCEDURE Provides s
Page 53 and 54:
ATLAS 550 System Manual Section 3 N
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
USER INTERFACE GUIDE Provides detai
Page 65 and 66:
ATLAS 550 System Manual Section 4 U
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180: ATLAS 550 System Manual Section 4 U
Page 229: ATLAS 550 System Manual Section 4 U
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
DETAIL LEVEL PROCEDURES DLP-1 Conne
Page 311 and 312:
DLP-1 Connecting a VT100 Terminal o
Page 313 and 314:
DLP-2 Logging in to the ATLAS 550 I
Page 315 and 316:
DLP-3 Setting IP Parameters for the
Page 317 and 318:
DLP-4 Verifying Communications Over
Page 319 and 320:
ATLAS 550 System Manual Section 5 D
Page 321 and 322:
DLP-5 Adding and Removing Users and
Page 323 and 324:
DLP-6 Updating the Firmware Using T
Page 325 and 326:
Page 327 and 328:
DLP-7 Updating the Firmware Using X
Page 329 and 330:
Page 331 and 332:
DLP-8 Saving the Current Configurat
Page 333 and 334:
DLP-9 Loading a Configuration Using
Page 335 and 336:
DLP-10 Saving and Transferring a Cu
Page 337 and 338:
DLP-11 Loading a Configuration Usin
Page 339 and 340:
DLP-12 Connecting the ATLAS 550 to
Page 341 and 342:
DLP-13 Using the ADTRAN Utility Sys
Page 343 and 344:
Page 345 and 346:
DLP-14 Connecting the Alarm Contact
Page 347 and 348:
Page 349 and 350:
DLP-15 Using the Alarm Connections
Page 351 and 352:
CONFIGURATION GUIDES CFG-1 Dial Bac
Page 353 and 354:
CFG-1 Dial Backup for Dedicated T1
Page 355 and 356:
ATLAS 550 System Manual Section 7,
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
SYSTEM EVENT LOGGING Explains the S
Page 367 and 368:
Page 369 and 370:
Page 371 and 372:
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
ADTRAN UTILITIES Provides instructi
Page 381 and 382:
ATLAS 550 System Manual Section 8 A
Page 383 and 384:
Page 385 and 386:
Page 387 and 388:
Page 389 and 390:
MIBS Provides a listing of SNMP Man
Page 391 and 392:
ATLAS 550 System Manual Section 9 M
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
show all

ATLAS 550 System Manual - Adtran

Create successful ePaper yourself

Delete template?

Save as template?