ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
MODULES (USSI-2) > DTE INTERFACE
Write security: 5; Read security: 5
Configures the Dual USSI Module for the appropriate interface type. Select the parameters matching the
interface cable being used.
MODULES (USSI-2) > DTE INTERFACE > PRT
Read security: 5
Displays the port number.
MODULES (USSI-2) > DTE INTERFACE > DTE INTERFACE MODE
Write security: 3; Read security: 5
Configures the Dual USSI Module interface type. The following options are available:
AUTO The ATLAS 550 will automatically detect the interface type. The
cable must be connected before the interface can be determined.
EIA-530A Configures the interface for EIA-530A use.
EIA-530\RS-449\V.36 Configures the interface for EIA-530, RS-449, or V.36 use.
X.21/V.11 Configures the interface for X.21 or V.11 use.
RS-232 Configures the interface for RS-232 use.
The following Dual USSI Option Module Systems are available (each includes the
appropriate interface cable):
• RS-449/V.36 System (P/N 4200754L1)
• EIA-530/530A System (P/N 4200754L2)
• X.21/V.11 System (P/N 4200754L3)
• RS-232 System (P/N 4200754L4)
MODULES (USSI-2) > DTE INTERFACE > CURRENT DTE TYPE
Read security: 5
Displays the current configuration of the Dual USSI Module DTE Interface.
MODULES MENU (QUAD BASIC RATE ISDN (U INTERFACE) OPTION MODULE)
The ATLAS 550 system controller automatically detects the presence of the Quad BRI (U Interface)
Option Module when it is installed in the system (listed as U-BRI-4). To see the menus for the Quad BRI
(U Interface) Option Module via the terminal menu, use the arrow keys to scroll to the MODULES menu and
press to access the module choices. Refer to the Quad BRI (U Interface) Option Module Quick
Start Guide for a menu tree containing a complete listing of menus.
142 © 2004 ADTRAN, Inc. 61200305L2-1B