ATLAS 550 System Manual - Adtran

ATLAS 550 System Manual Section 4 User Interface Guide
SYSTEM CONFIG > SYSLOG SETUP > HOST FACILITY
Write security: 3; Read security: 3
Specifies the facility destination of log events. Facilities are located on the host and are managed by the
Syslog host daemon running on either a UNIX machine or a PC. For details on the ADTRAN syslog server
host facilities, please refer to Section 8, ADTRAN Utilities.
SYSTEM CONFIG > REAL TIME CLOCK
Write security: 3; Read security: 5
Provides access to the two options listed below. You can review and edit these options.
SYSTEM CONFIG > REAL TIME CLOCK > CURRENT TIME/DATE
Write security: 3; Read security: 5
Displays the current date and time, including seconds. To edit this field, enter the time in 24-hour format
(such as 23:00:00 for 11:00 pm), and enter the date in mm-dd-yyyy format (for example, 09-23-1998).
SYSTEM CONFIG > REAL TIME CLOCK > AUTO DAYLIGHT SAVINGS
Write security: 3; Read security: 5
When enabled, automatically updates the time and date when Daylight Savings Time starts and when
Standard Time ends.
SYSTEM CONFIG > ACCESS PASSWORDS
Write security: 0; Read security: 0
Provides a way to edit passwords and to add new users and passwords. All menu items are protected by
passwords of varying security levels. By assigning different passwords to different security levels, the
ATLAS 550 system administrator can control which users can change various menu items. You can assign
multiple passwords at the same access level. This way, different users with the same access privileges can
have different passwords. The six password security levels are described in Table 1 on page 70.
SYSTEM CONFIG > ACCESS PASSWORDS > LABEL
Write security: 0; Read security: 0
Defines a username. The defined username is for labeling purposes only; it is not used for access into the
system.
SYSTEM CONFIG > ACCESS PASSWORDS > PASSWORD
Write security: 0; Read security: 0
Allows you to change the password (the default password is “password”). The current password displays
as a series of asterisks (********). The password can contain up to a combination of 12 case-sensitive
alphanumeric characters, spaces, or special characters.
SYSTEM CONFIG > ACCESS PASSWORDS > ACCESS RIGHTS
Write security: 0; Read security: 0
Defines the password level for the corresponding label. You can select from six different password levels
(see Table 1 on page 70).
61200305L2-1B © 2004 ADTRAN, Inc. 89