ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
DEDICATED MAPS (V35NX) > CREATE/EDIT MAPS > CONNECTS > TO/FROM CONFIG
Write security: 3; Read security: 5
Specifies the configuration for the FROM connection. The following selections may apply to the Dual Nx
56/64 Option Module, depending on the application:
DS0 SELECTION
Write security: 3; Read security: 5
Defines DS0s for an Nx port. Use this field to define the DS0s for this connection. This field only
applies to Nx-to-Nx or Nx-to-Pkt Endpt connections.
DS0 RATE
Write security: 3; Read security: 5
Sets the DS0 rate to either 56 or 64 kbps.
DEDICATED MAPS (DUAL USSI MODULE)
DEDICATED MAPS (USSI) > CREATE/EDIT MAPS > CONNECTS
Write security: 3; Read security: 5
Enters the dedicated map connections. Press to activate the submenus.
DEDICATED MAPS (USSI) > CREATE/EDIT MAPS > CONNECTS > TO/FROM CONFIG
Write security: 3; Read security: 5
Specifies the configuration for the FROM connection. The following selections may apply to the Dual USSI
Option Module, depending on the application:
DS0 SELECTION
Write security: 3; Read security: 5
Defines DS0s for an USSI port. Use this field to define the DS0s for this connection. This field only
applies to USSI-to-USSI, USSI-to-Nx or USSI-to-Pkt Endpt connections.
DS0 SELECTION
Write security: 3; Read security: 5
Defines DS0s for an USSI port. Use this field to define the DS0s for this connection. This field only
applies to USSI-to-USSI, USSI-to-Nx or USSI-to-Pkt Endpt connections.
DS0 RATE
Write security: 3; Read security: 5
Sets the DS0 rate to either 56 or 64 kbps.
240 © 2004 ADTRAN, Inc. 61200305L2-1B