ATLAS 550 System Manual - Adtran

Section 8 ADTRAN Utilities ATLAS 550 System Manual
Figure 4. TFTP Server Interface
Only one configuration transfer session (upload or download) may be active at a time. The TCP/IP
parameters are not saved or overwritten as part of an ATLAS 550 unit’s transferred configuration to allow
sending identical configurations to multiple units. When you start this program, a port is automatically
opened.
Server Menu
Provides enable, disable, abort, and exit options.
Enable
Enables the TFTP server. The IP address displays in the Status field and Server Ready displays in the
Log field.
Disable
Disables the TFTP server. When you select this option, the message Port Closed displays in the
STATUS field and in the LOG field.
Abort
Terminates a transfer that is in progress.
Exit
Terminates active transfers and closes the TFTP window.
Print Log
Provides print options.
...to Clipboard
Copies the information in the LOG field to the clipboard. You can then open any word processor and
paste the information into the program for review.
...to Printer
Sends the information in the LOG field to the default printer.
Clear Log
Deletes the information stored in the LOG field.
386 © 2004 ADTRAN, Inc. 61200305L2-1B