ATLAS 550 System Manual - Adtran

DLP-12 Connecting the ATLAS 550 to an External Modem
Introduction
The ATLAS 550 can be accessed and managed via an external modem, allowing the same capabilities to
the user as if connected to the local ADMIN (or CRAFT) port.
Prerequisite Procedures
The ATLAS 550 should be mounted in its permanent location before connecting it to an external modem.
Tools and Materials Required
• Female RJ-45 to Male DB-25 Connector (shipped with unit)
• Modem
• Modem Cable
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Electronic equipment can be damaged by static electrical discharge. Before handling it,
put on an antistatic discharge wrist strap to prevent damage to electronic components.
Place equipment in antistatic packing material when transporting or storing. When
working on equipment, always place it on an approved antistatic mat that is electrically
grounded.
61200305L2-1B © 2004 ADTRAN, Inc. 339