ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
SYSTEM INFO > FIRMWARE REVISION
Read security: 5
Displays the current firmware revision level of the controller.
SYSTEM INFO > SYSTEM UPTIME
Read security: 5
Displays the length of time the ATLAS 550 system has been running. Each time you reset the system, this
value resets to 0 days, 0 hours, 0 min and 0 secs.
SYSTEM INFO > STARTUP MODE
Read security: 5
Displays details about the last system startup. For example, rebooting the ATLAS 550 from the SYSTEM
UTILITY menu will cause this field to read WARM REBOOT.
SYSTEM INFO > CURRENT TIME/DATE (24HR)
Write security: 3; Read security: 5
Displays the current date and time, including seconds. To edit this field, place the cursor on the field and
press . Then, enter the time in a 24-hour format (such as 23:00:00 for 11:00 pm), and the date in
mm-dd-yyyy format (for example, 10-30-1998). Press when you are finished to accept the change.
SYSTEM INFO > INSTALLED MEMORY
Read security: 5
Displays the type and amount of memory in use (including Flash memory and DRAM).
SYSTEM INFO > SERIAL NUMBER
Read security: 5
Displays the serial number for the unit. The serial number of the ATLAS 550 will automatically display in
this field.
SYSTEM INFO > BOOT ROM REV
Read security: 5
Displays the boot ROM revision.
72 © 2004 ADTRAN, Inc. 61200305L2-1B