ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
MODULES (USSI-2) > DIAL
Write security: 3; Read security: 5
Dials a USSI port that is configured to ignore DTR.
MODULES (USSI-2) > DIAL > PRT
Read security: 5
Displays the port number. There are 2 available interfaces on the Dual USSI Option Module.
MODULES (USSI-2) > DIAL > MODE
Write security: 3; Read security: 5
Configures the dialing mode. The following options are available:
PERSISTENT Redial whenever the call is cleared or if the call fails.
ONE TIME Attempt the call only once.
MODULES (USSI-2) > DIAL > DIAL
Write security: 0; Read security: 0
Signals the USSI port to dial/clear the call.
MODULES (USSI-2) > DIAL > SRC ID
Write security: 3; Read security: 5
Indicates the SOURCE ID of the number to be dialed. Configure this field in the USSI INTERFACE
CONFIGURATION section of the DIAL PLAN.
MODULES (USSI-2) > DIAL > NUMBER
Write security: 3; Read security: 5
Indicates the number to be dialed. Configure this field in the USSI INTERFACE CONFIGURATION section of
the DIAL PLAN.
MODULES (USSI-2) > TEST
Write security: 4; Read security: 5
These options initiate different types of tests and display test results.
MODULES (USSI-2) > TEST > PORT
Write security: 5; Read security: 5
Displays the port number.
140 © 2004 ADTRAN, Inc. 61200305L2-1B