ATLAS 550 System Manual - Adtran

ATLAS 550 System Manual Section 5 DLP-4
3. Telnet to the ATLAS 550.
From the same computer used in the previous step, Telnet to the ATLAS 550 and verify that the Telnet
session is properly opened. Once the Telnet session is established, press to logout and
close the session.
Refer to the documentation of the computer system if you are unsure how to perform a
Telnet. Most computers running a networked version of Microsoft Windows or UNIX
allow a Telnet to be performed by typing telnet at a command line prompt.
Telnet is a utility common on many local area networks that allows remote access to
another computer or piece of equipment.
61200305L2-1B © 2004 ADTRAN, Inc. 319