ATLAS 550 System Manual - Adtran

ATLAS 550 System Manual Section 4 User Interface Guide
DEDICATED MAPS (E1/PRA NETWORK INTERFACE)
DEDICATED MAPS (E1/PRA) > CREATE/EDIT MAPS > CONNECTS
Write security: 3; Read security: 5
Enters the dedicated map connections. Press to activate the submenus.
DEDICATED MAPS (E1/PRA) > CREATE/EDIT MAPS > CONNECTS > TO/FROM CONFIG
Write security: 3; Read security: 5
Specifies the configuration for the TO/FROM connection. The following selections may apply to the
E1/PRA Network Interface Module, depending on the application:
TS0 SELECTION
Write security: 3; Read security: 5
Defines TS0s for an E1 port. Use this field to define the TS0s for this connection. You can enter the
TS0s in several ways. For example, to enter TS0s one through five, enter 1-5. For TS0s one and five,
enter 1,5.
TS0 AVAILABLE
Write security: 3; Read security: 5
Indicates which TS0s of the E1 are assigned. TS0 assignment is based on the following items:
DIGIT 0-9
*
!
S
S
N
N
TS0 RATE
This TS0 is available. The digit that displays in this field represents the last digit of
the TS0 number.
This TS0 has been requested for this connection, but the TS0 is not yet activated for
this port.
This TS0 is used by this port in this connection and is currently activated.
This TS0 is used in the switched DIAL PLAN.
This TS0 is used in the switched DIAL PLAN and conflicts with this connection.
This TS0 is already used in this DEDICATED MAP.
This TS0 is already used in this DEDICATED MAP and conflicts with this connection.
Write security: 3; Read security: 5
Sets the TS0 rate to either 56 or 64 kbps. This field is only valid for E1 ports mapped to a PKT
ENDPNT.
61200305L2-1B © 2004 ADTRAN, Inc. 235