ATLAS 550 System Manual - Adtran

ATLAS 550 System Manual Section 4 User Interface Guide
LCP DEBUGGING
Write security: 3; Read security: 5
This turns on LCP negotiation debugging.
IPCP DEBUGGING
Write security: 3; Read security: 5
This turns on IPCP negotiation debugging.
BCP DEBUGGING
Write security: 3; Read security: 5
This turns on BCP negotiation debugging.
AUTHENTICATION DEBUGGING
Write security: 3; Read security: 5
This turns on authentication debugging.
UNKNOWN PROTOCOL DEBUGGING
Write security: 3; Read security: 5
This turns on debugging for all unknown protocols received on this link.
MAX CONFIG
Write security: 3; Read security: 5
This value is the number of unanswered configuration requests that should be transmitted before
giving up on negotiation. The default value is 10.
MAX TIMER
Write security: 3; Read security: 5
This value is the number of seconds to wait between unanswered configuration requests. The default
value is 2 seconds.
MAX FAILURE
Write security: 3; Read security: 5
Due to the nature of PPP, configuration options may not be agreed upon between two PPP peers. This
value is the number of configuration-NAKs that should occur before an option is
configuration-rejected. This allows a connection to succeed that might otherwise fail. The default
value is 5.
61200305L2-1B © 2004 ADTRAN, Inc. 197