ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
ROUTER > IP > PING > TX STATS
Read security: 2
Displays the number of ping requests transmitted (n txed), the number of ping replies received (n rxed)
and the number of ping requests that were lost (n lost).
ROUTER > IP > PING > RESET STATS
Write security: 2; Read security: 2
Resets all ping statistics to zero. If the ping client is active, this menu will stop it.
ROUTER > IP > PING > START/STOP
Write security: 2; Read security: 2
If the ping client is currently idle, this menu sends pings to the specified address. If the ping client is active,
the menu stops sending pings.
ROUTER > IP > TELNET CLIENT
Write security: 2; Read security: 2
Allows a user to open a Telnet session to any device listed in the ATLAS 550 route table.
ROUTER > IP > TELNET CLIENT > ADDRESS
Write security: 2; Read security: 2
Defines the IP address assigned to the remote unit you are trying to connect to.
ROUTER > IP > TELNET CLIENT > ESCAPE CHAR
Write security: 2; Read security: 2
Defines the Telnet client escape character. Typing the combination characters will close the active Telnet
session to the remote unit specified in the ADDRESS field.
OPTION KEYSTROKE
^ ] + ]
^ \ + \
^ [ + [
^ ^ + + 6
^ _ + + -
ROUTER > IP > TELNET CLIENT > PORT
Write security: 2; Read security: 2
Defines the port used in the remote login session. Default (for Telnet) is 23.
ROUTER > IP > TELNET CLIENT > CONNECT
Write security: 2; Read security: 2
Activator used to start a Telnet session to the remote unit configured in the ADDRESS field.
224 © 2004 ADTRAN, Inc. 61200305L2-1B