ATLAS 550 System Manual - Adtran

ATLAS 550 System Manual Section 7, CFG-1
3. For the port location of the backup entry, select the PORT/PEP column and press to display a
list of available ports. (This is the port that will be backed up if a failure occurs on the network T1.) For
this sample network, choose 2.1)NX56/64 PORT.
The PORT/PEP field will only allow you to select V.35 ports that were entered in the FROM
SLT field in the DEDICATED MAP.
4. Enter the correct call routing information for this backup entry by selecting the IN#ACCEPT field and
pressing . Then, press the right-arrow key to enter the right-pane menus. Select the ACCEPT
NUMBER field and press . To accept calls coming from the network PRI, enter 555-1000.
For a detailed explanation of the possible entries, highlight the ACCEPT NUMBER field and
press .
61200305L2-1B © 2004 ADTRAN, Inc. 361