ATLAS 550 System Manual - Adtran

ATLAS 550 System Manual Section 4 User Interface Guide
T1 TROUBLE CODE VALUE
Write security: 3; Read security: 5
(Available only when T1 TROUBLE CODE SERVICE is enabled.) Displays the Hex value of the 2.5
second pre-alarm transmission.
DEDICATED MAPS (LEGACY DATA MODULE)
DEDICATED MAPS (LEGACY) > CREATE/EDIT MAPS > CONNECTS
Write security: 3; Read security: 5
Enters the dedicated map connections. Press to activate the submenus.
DEDICATED MAPS (LEGACY) > CREATE/EDIT MAPS > CONNECTS > TO/FROM CONFIG
Write security: 3; Read security: 5
Specifies the configuration for the FROM connection. The following selections apply to a connection
between the Legacy Data Option Module and a Packet Endpoint. This is the only valid application for the
Legacy Data Option Module.
SYNC/ASYNC
Write security: 3; Read security: 5
Configures the port for either synchronous or asynchronous data transmission.
INTERFACE TYPE
The mode of operation depends on the protocol selected in the PACKET MANAGER menus.
Write security: 3; Read security: 5
Configures the physical interface of the port as EIA-232 or V.35. Selecting V.35 requires the
purchase of the optional V.35 cable (P/N 1200348L1). If you are using T-BOP in a multipoint
application, you will need a custom cable shorting RTS to CTS.
BIT RATE
Write security: 3; Read security: 5
Sets the interface bit rate for the port. Selections range from 2400 baud to 128 kbaud.
61200305L2-1B © 2004 ADTRAN, Inc. 243