ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
MODULES (T1/PRI-1) > CONFIGURATION > ADLP OVER FDL
Write security: ADTRAN Use Only; Read security: 5
The ADTRAN Data Link Protocol (ADLP) provides a communications link between ADTRAN
equipment over point-to-point or multidrop connections that can be used for configuring and monitoring
remote ADTRAN devices. Choose ENABLE to activate the ADLP over the FDL for the DS1 interface.
MODULES (T1/PRI-1) > TEST
Write security: 5; Read security: 5
These options initiate different types of tests and display test results.
MODULES (T1/PRI-1) > TEST > PRT
Read security: 5
Displays the port number.
MODULES (T1/PRI-1) > TEST > LOC LB
Write security: 4; Read security: 5
Initiates a loopback on near-end (local) port (see Figure 9). The following options are available:
LINE Metallic loopback
PAYLD Payload loopback - framing and clocking are regenerated
DS1
NI CSU
T1/PRI
Payload Loopback
Line Loopback
Figure 9. T1/PRI Loopback Test Diagram
108 © 2004 ADTRAN, Inc. 61200305L2-1B