ATLAS 550 System Manual - Adtran

Section 8 ADTRAN Utilities ATLAS 550 System Manual
Session Menu
Opens VT100 terminal emulation session.
Connect
Opens a specified serial port for a VT100 session.
Disconnect
Closes a specified serial port at the end of a VT100 session.
File Transfer
Uploads and downloads files to and from an ATLAS 550.
XMODEM CRC
Selects the XMODEM file transfer protocol.
ASCII Cfg Files
Selects ASCII transfer mode. Primarily useful for configuration transfers for the ADTRAN products.
Edit Menu
Identical to the Telnet EDIT MENU (see Edit Menu on page 382).
Port Menu
Changes serial COM port SETTINGS. Provides data
rate settings from 300—57600 bps.
Options Menu
Provides terminal screen commands.
Refresh Screen
Redraws the screen.
Connect
Provides the options TRANSMIT WAKEUP and
TRANSMIT REFRESH.
Transmit Wakeup
Provides a control sequence that puts the ATLAS 550 Control Port online in terminal mode.
Transmit Refresh
Provides a control sequence to refresh the screen automatically when connecting. (This is the default
setting for the ATLAS 550.)
Colors
Identical to Telnet COLORS MENU (see Colors on page 382).
Local Echo
Echoes each character that you enter.
AutoRepeat
Repeats characters you select from the keyboard, if you hold down the key.
384 © 2004 ADTRAN, Inc. 61200305L2-1B