ATLAS 550 System Manual - Adtran

ATLAS 550 System Manual Section 4 User Interface Guide
SYSTEM UTILITY > UPDATE FIRMWARE > TRANSFER METHOD
Write security: 1; Read security: 5
Lists the two transfer methods for updating firmware after selecting a module slot: XMODEM and TFTP.
XMODEM transfers files by connecting to a communications program that supports XMODEM uploads to
the terminal interface. TFTP transfers files by specifying an appropriate server address and filename.
SYSTEM UTILITY > UPDATE FIRMWARE > TFTP SERVER IP ADDRESS
Write security: 1; Read security: 5
(Available for TFTP transfers only.) Configures the IP address of the TFTP Server on which the update file
resides. The ATLAS 550 uses this field to locate the network server on which the update file resides.
SYSTEM UTILITY > UPDATE FIRMWARE > TFTP SERVER FILENAME
Write security: 1; Read security: 5
(Available for TFTP transfers only.) Identifies the name of the update file to retrieve from the TFTP
Server. Enter the full path name and filename for the file.
SYSTEM UTILITY > UPDATE FIRMWARE > RESTART SCHEDULE
Write security: 1; Read security: 5
Indicates when to restart the updated module to invoke the new software, after selecting a module slot. The
two options include RESTART IMMEDIATELY AFTER UPDATE and RESTART AT SPECIFIED DATE AND TIME.
SYSTEM UTILITY > UPDATE FIRMWARE > RESTART SCHEDULE > RESTART IMMEDIATELY
AFTER UPDATE
Write security: 1; Read security: 5
Automatically restarts the module or unit (when SLOT 0 is selected) immediately after the update is
complete.
SYSTEM UTILITY > UPDATE FIRMWARE > RESTART SCHEDULE > RESTART AT SPECIFIED DATE
AND TIME
Write security: 1; Read security: 5
Lets you specify a date and time to automatically restart the updated module or unit (when SLOT 0 is
selected). When you select this option, a new field called RESTART DATE AND TIME displays below the
current field.
RESTART DATE AND TIME
Write security: 1; Read security: 5
(Available only when configured for RESTART AT SPECIFIED DATE AND TIME.) Defines the date and
time to restart the system after updating. Enter the time using a 24-hour format (e.g., 23:25:30 for
11PM, 25 minutes, 30 seconds). Enter the date in mm-dd-yyyy format (e.g.,11-08-2000).
61200305L2-1B © 2004 ADTRAN, Inc. 93