ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
MODULES (DBU) > BONDING CONFIGURATION > TANULL TIMER
Write security: 3; Read security: 5
Specifies the length of time the answering endpoint attempts to detect the BONDING negotiation pattern
from the originating endpoint before deciding the BONDING call has failed. It may be necessary to
shorten this timer if the DTE equipment using the BONDING module also has timer constraints for
completing non-BONDING parameter negotiation.
MODULES (DBU) > BONDING CONFIGURATION > TCID TIMER
Write security: 3; Read security: 5
Specifies the length of time both endpoints attempt to negotiate an agreeable value for bearer channels and
channel capacities before deciding the BONDING call has failed.
MODULES (DBU) > BONDING CONFIGURATION > CALL STAGGER
Write security: 3; Read security: 5
Specifies the amount of delay between placing calls for outgoing BONDING sessions. The following call
stagger values are available: NO STAGGER, 500 MS, 1 SEC, and 2 SEC.
MODULES (DBU) > BRI ALARM
Read security: 5
Displays the alarm status for the selected BRI DBU Network Interface Module.
MODULES (DBU) > BRI ALARM > PHYSICAL ALARM
Read security: 5
Displays the current alarm status of the BRI interface.
LAYER 1 A layer one alarm is indicated by an asterisk (*) when the BRI physical layer is not
active. An L1 alarm is present when problems are detected with the endpoint or with
cabling.
MODULES (DBU) > BRI CHANNEL STATUS
Read security: 5
Displays the status of the individual bearer (B) channels on the BRI interface.
MODULES (DBU) > BRI CHANNEL STATUS > PRT
Read security: 5
Indicates the port number.
120 © 2004 ADTRAN, Inc. 61200305L2-1B