ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
MODULES MENU (QUAD/OCTAL FXS OPTION MODULE)
The ATLAS 550 system controller automatically detects the presence of the Quad/Octal FXS Option
Modules when they are installed in the system (Quad is listed as FXS-4 and the Octal is listed as FXS-8).
All menus in this section that apply to both modules are listed as FXS-4/8. To see the menus for the
Quad/Octal FXS Option Module via the terminal menu, use the arrow keys to scroll to the MODULES menu
and press to access the module choices. Refer to the Quad/Octal FXS Option Module Quick Start
Guide for a menu tree containing a complete listing of menus.
MODULES (FXS-4/8) > INFO
Read security: 5
Provides information about the module part number, serial number, and assembly revision.
MODULES (FXS-4/8) > INFO > PART NUMBER
Read security: 5
Displays the part number of the module.
MODULES (FXS-4/8) > INFO > SERIAL NUMBER
Read security: 5
Displays the serial number of the module.
MODULES (FXS-4/8) > INFO > ASSEMBLY REVISION
Read security: 5
Displays the assembly revision of the module.
MODULES (FXS-4/8) > INFO > PROCESSOR ID
Read security: 5
Displays the processor ID of the selected module.
MODULES (FXS-4/8) > STATUS
Read security: 5
Displays the status of each of the FXS ports.
MODULES (FXS-4/8) > STATUS > PRT
Read security: 5
Indicates the port number. There are 4 available interfaces on the Quad FXS Option Module and 8 on the
Octal FXS Option Module.
148 © 2004 ADTRAN, Inc. 61200305L2-1B