ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
MODULES (ST-BRI-4) > ALARMS > ALARMS
Write security: 5; Read security: 5
Displays the current alarm status of each BRI S/T interface.
L1 DOWN A layer one alarm is indicated by an asterisk (*) when the BRI S/T
physical layer is not active. An L1 alarm is present when problems are
detected with the endpoint or a cabling problem.
MODULES (ST-BRI-4) > ALARMS > CHANNEL
Write security: 5; Read security: 5
Displays the alarm status of the bearer (B) channels and the datalink (D) channel. A hyphen (–) indicates
no active channel alarm and D indicates an active D channel alarm.
MODULES (ST-BRI-4) > CHANNEL USAGE
Read security: 5
Displays the channel status of the bearer (B) channels and the datalink (D) channel for each BRI S/T
interface.
MODULES (ST-BRI-4) > CHANNEL USAGE > PRT
Write security: 5; Read security: 5
Indicates the port number. There are 4 available interfaces on the Quad BRI-S/T Option Module.
MODULES (ST-BRI-4) > CHANNEL USAGE > CHA
Write security: 5; Read security: 5
(Channel) Displays the status of individual channels. The following symbols may display:
- Unallocated channel
. Inactive channel
A Active B channel
D Active D channel
MODULES (ST-BRI-4) > CONFIGURATION
Write security: 5; Read security: 5
Allows the user to personally identify each port with an appropriate name.
MODULES (ST-BRI-4) > CONFIGURATION > PRT
Write security: 5; Read security: 5
Displays the port number. There are 4 available interfaces on the Quad BRI-S/T Option Module.
MODULES (ST-BRI-4) > CONFIGURATION > PORT NAME
Write security: 3; Read security: 5
Accepts any alpha-numeric name up to 16 characters long, to uniquely identify each port on the Octal BRI
S/T Option Module.
146 © 2004 ADTRAN, Inc. 61200305L2-1B