ATLAS 550 System Manual - Adtran

ATLAS 550 System Manual Section 4 User Interface Guide
Name Description
ROUTER > IP > STATISTICS > CLEAR
Write security: 2; Read security: 2
Clears current statistics in the IP, ICMP, TCP, UDP, and IP Fast Cache statistics tables.
ROUTER > IP > UDP RELAY
Write security: 2; Read security: 2
Allows the router to act as a relay agent for UDP (User Datagram Protocol) broadcast packets. Normally, a
router will not forward UDP broadcast packets. However, many network applications use UDP broadcasts
to configure addresses, host names, and other information. If hosts using these protocols are not on the
same network segment as the servers providing the information, the client programs will not receive a
response without enabling the UDP relay agent.
ROUTER > IP > UDP RELAY > ENABLE
Write security: 2; Read security: 2
Enables/disables the router to act as a relay agent.
ROUTER > IP > UDP RELAY > RELAY TABLE
Table 9. UDP Statistics
INDATAGRAMS The total number of UDP datagrams delivered to UDP users.
NOPORTS The total number of received UDP datagrams for which there was no application at
the destination port.
INERRORS The number of received UDP datagrams that could not be delivered for reasons
other than the lack of an application at the destination port.
OUTDATAGRAMS The total number of UDP datagrams sent from this ATLAS 550.
CLEAR Clears the accumulated statistics.
Name Description
Table 10. IP Fast Cache Statistics
HITS Total number of times the ATLAS 550 went into the Fast Cache and successfully
retrieved an IP address.
MISSES Total number of times the ATLAS 550 went into the Fast Cache and failed to
retrieve an IP address.
CLEAR Clears the accumulated statistics.
Write security: 2; Read security: 2
(Available only when UDP Relay is ENABLED.) Lists up to four relay destination servers (RELAY TABLE
0-3). Each server can be configured using the following menus: ENABLE, IP, and UDP.
61200305L2-1B © 2004 ADTRAN, Inc. 229