ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
PACKET MANAGER > PACKET ENDPNTS > PERFORMANCE
Write security: 3; Read security: 5
Displays performance information for each packet endpoint including the endpoint name, the protocol
used, link stats, and sublink stats.
PACKET MANAGER > PACKET ENDPNTS > PERFORMANCE > ENDPNT NAME
Read security: 5
Displays the packet endpoint name as defined in the PACKET ENDPNTS/CONFIG menu (see also Packet
Manager > Packet Endpnts > Config > Endpnt Name on page 193).
PACKET MANAGER > PACKET ENDPNTS > PERFORMANCE > PROT
Read security: 5
Displays the layer 2 protocol for this packet endpoint. FR indicates this packet endpoint is configured for
frame relay. TBOP indicates this packet endpoint is configured for Transparent Bit Oriented Protocol
(TBOP). PPP indicates this packet endpoint is configured for the Point-to-Point Protocol. SDLC indicates
this packet endpoint is configured for SDLC signaling.
SDLC signaling is only available using the Legacy Data Option Module (P/N 1200342L1).
PACKET MANAGER > PACKET ENDPNTS > PERFORMANCE > LINK STATS - FRAME RELAY
Write security: 3; Read security: 5
Displays layer 2 performance statistics. The statistics fields for frame relay reflect the total count since last
cleared. The available statistic information is discussed below.
TX PACKETS Total number of frame relay packets transmitted through this packet
endpoint, including both user data (on all PVCs) and signaling.
RX PACKETS Total number of frame relay packets received through this packet endpoint
on all PVCs.
STATE CHANGES Total number of times that frame relay signaling has gone active or
inactive.
SIGNALING ERRORS Total number of signaling frames received with PVC signaling protocol
violations.
SIGNALING TIMEOUTS Number of times signaling polls were not received in the time specified in
T391 in the PACKET ENDPTS/CONFIG menu.
ASYNC STATUS TX Full status not transmitted during the normal full status cycle. An
asynchronous status message is used to quickly activate a link.
ASYNC STATUS RX Full status not received during the normal full status cycle. An
asynchronous status message is used to quickly activate a link.
FULL STATUS TX Number of full status polls transmitted by this packet endpoint.
FULL STATUS RX Number of full status polls received by this packet endpoint.
190 © 2004 ADTRAN, Inc. 61200305L2-1B