ATLAS 550 System Manual - Adtran

ATLAS 550 System Manual Section 8 ADTRAN Utilities
Capture Menu
Identical to the Telnet CAPTURE MENU (see Capture Menu on page 382).
Help Menu
Provides online help and information about the version number.
Contents
Opens online help.
About
Displays version and owner information.
3. TFTP SERVER
The TFTP Server utility transfers ATLAS 550 configuration files to and from a TFTP server (see Figure 3
for the menu tree). You can install this program on a PC running any version of Microsoft Windows. The
configuration of an ATLAS 550 can be saved offline as a backup file. The saved file may also be used to
send the same configuration to multiple ATLAS 550 units. Transfer configuration files using the TFTP
protocol (a TCP/IP user protocol) via the Ethernet port. The ATLAS 550 must have a valid IP address,
subnet mask, and default gateway (if required), and be connected to an Ethernet network before
proceeding. Figure 4 shows the TFTP server interface. For information on transferring and saving
configurations using TFTP, refer to DLP-8, Saving the Current Configuration Using TFTP.
Files must be placed in the Application directory where you installed the product.
Received files are also placed here.
Enable
Server Disable
Abort
Exit
TFTP Server ...to Clipboard
Print Log ...to Printer
Clear Log
Help Contents
About
Figure 3. TFTP Server Interface Menu Tree
61200305L2-1B © 2004 ADTRAN, Inc. 385