ATLAS 550 System Manual - Adtran

DLP-11 Loading a Configuration Using XMODEM
Introduction
The ATLAS 550 supports configuration uploads from a unit via the ADMIN or CRAFT interface using a
VT100 terminal or terminal emulator (with XMODEM). This DLP provides the steps for a successful
configuration upload using either the ADMIN or CRAFT port and XMODEM.
Tools and Materials Required
• VT100 terminal or PC with VT100 terminal emulation software
• XMODEM software
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Electronic equipment can be damaged by static electrical discharge. Before handling it,
put on an antistatic discharge wrist strap to prevent damage to electronic components.
Place equipment in antistatic packing material when transporting or storing. When
working on equipment, always place it on an approved antistatic mat that is electrically
grounded.
61200305L2-1A © 2004 ADTRAN, Inc. 337