ATLAS 550 System Manual - Adtran

Section 4 User Interface Guide ATLAS 550 System Manual
MODULES (FXS-4/8) > CONFIG > 2W IMPEDANCE
Read security: 5
2-wire input impedance is set to either 600 Ω +2.16 µFor 900 Ω +2.16 µF. This is a read-only field.
MODULES (FXS-4/8) > CONFIG > CODING SCHEME
Read security: 5
Displays the current PCM coding scheme. Currently only µ-LAW is supported.
MODULES MENU (QUAD/OCTAL FXO OPTION MODULE)
The ATLAS 550 system controller automatically detects the presence of the Octal/Quad FXO Option
Module when they are installed in the system (Quad is listed as FXO-4 and the Octal is listed as FXO-8).
All menus in this section that apply to both modules are listed as FXS-4/8. To see the menus for the
Octal/Quad FXO Option Module via the terminal menu, use the arrow keys to scroll to the MODULES menu
and press to access the module choices. Refer to the Quad/Octal FXO Option Module Quick Start
Guide for a menu tree containing a complete listing of menus.
MODULES (FXO-4/8) > INFO
Read security: 5
Provides information about the module part number, serial number, and assembly revision.
MODULES (FXO-4/8) > INFO > PART NUMBER
Read security: 5
Displays the part number of the module.
MODULES (FXO-4/8) > INFO > SERIAL NUMBER
Read security: 5
Displays the serial number of the module.
MODULES (FXO-4/8) > INFO > ASSEMBLY REVISION
Read security: 5
Displays the assembly revision of the module.
MODULES (FXO-4/8) > INFO > FIRMWARE REVISION
Read security: 5
Displays the current firmware revision of the selected module.
MODULES (FXO-4/8) > INFO > PROCESSOR ID
Read security: 5
Displays the processor ID of the selected module.
152 © 2004 ADTRAN, Inc. 61200305L2-1B